169X6X6 by Danfoss | Compression Fitting | Male Connector 90° Elbow | Long Nut | 3/8" Tube OD x 3/8" Male NPTF | Brass Collection-lvl3_Cutting Tools (44-462) 2-1/2" x 2" 3

(44-462) 2-1/2" x 2" 3

Part Number Size Actuator Type Stem Type Wetted Elastomers S01A15C1EE 1-1/2" Spring Return Actuator (Air-To-Raise) Elastomer O-Ring Stem Seal EPDM Wetted Elastomer S01A15C2EE 1-1/2" Spring Return Actuator (Air-To-Lower) Elastomer O-Ring Stem Seal EPDM Wetted Elastomer S01A15C3EE 1-1/2" Double Acting Actuator (Air-To-Air) Elastomer O-Ring Stem Seal EPDM Wetted Elastomer S01A15C1EV 1-1/2" Spring Return Actuator (Air-To-Raise) Elastomer O-Ring Stem Seal FKM Wetted Elastomer S01A15C2EV 1-1/2" Spring Return Actuator (Air-To-Lower) Elastomer O-Ring Stem Seal FKM Wetted Elastomer S01A15C3EV 1-1/2" Double Acting Actuator (Air-To-Air) Elastomer O-Ring Stem Seal FKM Wetted Elastomer S01A15C1PE 1-1/2" Spring Return Actuator (Air-To-Raise) PTFE Plug Seal EPDM Wetted Elastomer S01A15C2PE 1-1/2" Spring Return Actuator (Air-To-Lower) PTFE Plug Seal EPDM Wetted Elastomer S01A15C3PE 1-1/2" Double Acting Actuator (Air-To-Air) PTFE Plug Seal EPDM Wetted Elastomer S01A15C1PV 1-1/2" Spring Return Actuator (Air-To-Raise) PTFE Plug Seal FKM Wetted Elastomer S01A15C2PV 1-1/2" Spring Return Actuator (Air-To-Lower) PTFE Plug Seal FKM Wetted Elastomer S01A15C3PV 1-1/2" Double Acting Actuator (Air-To-Air) PTFE Plug Seal FKM Wetted Elastomer S01A15C1PEG 1-1/2" Spring Return Actuator (Air-To-Raise)

827"   SS20MO20XFJ20-Z-V Zinc Viton 4

Without Gauge Size Flow (SCFM) R16-02RHG R16-02R 1/4" 71

000 PSI --- 3/4" --- --- 2

169X6X6 by Danfoss | Compression Fitting | Male Connector 90° Elbow | Long Nut | 3/8" Tube OD x 3/8" Male NPTF | Brass Collection-lvl3_Cutting Tools (44-462) 2-1/2" x 2" 3Applications: Instrumentation, hydraulic and pneumatic systems. Advantages: Low cost. No flaring. Easy to assemble. Fair vibration resistance use long nut when greater vibration resistance is needed. Used With: Aluminum, copper and plastic tubing. (Not recommended for steel tubing.) Material: CA360 Brass Pressure: Working pressure up to 2000 psi with a 4: 1 safety factor depending on tube size. When using plastic tubing, use the working pressure for